Storage Setup#
- SATA Controller
-
Options:
- Enabled – Default.
- Disabled.
WMI Setting name Values SVP / SMP Req'd AMD/Intel SATAController Disabled, Enabled Yes Both - SATA Drive
-
Options:
- Enabled – Default.
- Disabled.
WMI Setting name Values SVP / SMP Req'd AMD/Intel SATADriveX Disabled, Enabled Yes Both In the WMI class name, X represents the drive number.
- M.2 Drive
-
Options:
- Enabled – Default.
- Disabled.
WMI Setting name Values SVP / SMP Req'd AMD/Intel M.2DriveX Disabled, Enabled Yes Intel In the WMI class name, X represents the drive number.
- Configure Storage as
-
Adds a delay before the first access of a hard disk by the system software. Some hard disks hang if accessed before they have initialized themselves. This delay ensures the hard disk has initialized after power up, prior to being accessed.
Options:
- AHCI – Default.
- RAID
Device driver support is required for AHCI or RAID. Depending on how the hard disk image was installed, changing this setting may prevent the system from booting.
- Hard Disk Pre-delay
-
Adds a delay before the first access of a hard disk by the system software. Some hard disks hang if accessed before they have initialized themselves. This delay ensures the hard disk has initialized after power up, prior to being accessed.
Options:
- Disabled – Default.
- 3 Seconds
- 6 Seconds
- 9 Seconds
- 12 Seconds
- 15 Seconds
- 21 Seconds
- 30 Seconds
WMI Setting name Values SVP / SMP Req'd AMD/Intel HardDiskPre-delay Disabled, 3 Seconds, 6 Seconds, 9 Seconds, 12 Seconds, 15 Seconds, 21 Seconds, 30 Seconds Yes Both