Storage Setup#
SATA Controller#
Possible options:
- Enabled – Default.
- Disabled
| WMI Setting name | Values | SVP / SMP Req'd | AMD/Intel |
|---|---|---|---|
| SATAController | Disabled, Enabled | Yes | Both |
SATA Drive {X}#
Possible options:
- Enabled – Default.
- Disabled
| WMI Setting name | Values | SVP / SMP Req'd | AMD/Intel |
|---|---|---|---|
| SATADriveX | Disabled, Enabled | Yes | Both |
Attention
In the WMI class name, X represents the drive number.
M.2 Drive {X}#
Possible options:
- Enabled – Default.
- Disabled
| WMI Setting name | Values | SVP / SMP Req'd | AMD/Intel |
|---|---|---|---|
| M.2DriveX | Disabled, Enabled | Yes | Intel |
Attention
In the WMI class name, X represents the drive number.
MCIO Drive {X}-{Y}#
Possible options:
- Enabled – Default.
- Disabled
| WMI Setting name | Values | SVP / SMP Req'd | AMD/Intel |
|---|---|---|---|
| MCIODriveXY | Disabled, Enabled | Yes | Intel |
Attention
In the WMI class name, X & Y represents the drive number.
SATA Drive * Hot-Plug Support#
Possible options:
- Disabled – Default.
- Enabled
| WMI Setting name | Values | SVP / SMP Req'd | AMD/Intel |
|---|---|---|---|
| SATADriveXHotPlugSupport | Disabled, Enabled | Yes | Both |
Attention
In the WMI class name, X represents the drive number.
Configure Storage as#
Attention
Device driver support is required for AHCI or RAID. Depending on how the hard disk image was installed, changing this setting may prevent the system from booting.
Possible options:
- AHCI – Default.
- RAID
| WMI Setting name | Values | SVP / SMP Req'd | AMD/Intel |
|---|---|---|---|
| ConfigureStorageas | AHCI, RAID | Yes | Intel |
Configure SATA as#
Attention
Device driver support is required for AHCI or RAID. Depending on how the hard disk image was installed, changing this setting may prevent the system from booting.
Possible options:
- AHCI – Default.
- RAID
| WMI Setting name | Values | SVP / SMP Req'd | AMD/Intel |
|---|---|---|---|
| ConfigureSATAas | AHCI, RAID | Yes | Both |
RAIDXpert2 Configuration Utility#
Press Enter to launch the RAIDXpert2 Configuration Utility, used to create and manage AMD RAID arrays.
Attention
Only available when Configure SATA as is RAID.
Hard Disk Pre-delay#
Adds a delay before the first access of a hard disk by the system software. Some hard disks hang if accessed before they have initialized themselves. This delay ensures the hard disk has initialized after power up, prior to being accessed.
Possible options:
- Disabled – Default.
- 3 Seconds
- 6 Seconds
- 9 Seconds
- 12 Seconds
- 15 Seconds
- 21 Seconds
- 30 Seconds
| WMI Setting name | Values | SVP / SMP Req'd | AMD/Intel |
|---|---|---|---|
| HardDiskPre-delay | Disabled, 3 Seconds, 6 Seconds, 9 Seconds, 12 Seconds, 15 Seconds, 21 Seconds, 30 Seconds | Yes | Both |
RST PCIe Storage#
Enables or disables RST (Rapid Storage Technology) PCIe storage remapping.
Attention
Only available when Configure SATA as is Intel(R) RST with Intel(R) Optane.
Possible options:
- Not RST Controlled – Default.
- RST Controlled